
Imcoa SS
Tube Insulation
Imcoa® SS is a closed-cell polyethylene foam self-seal pipe insulation is used in residential, commercial and industrial plumbing projects to prevent heat loss and protect pipes from freezing. It is available in wall thicknesses of 3/8", 1/2", 3/4" and 1", in sizes ranging from 3/8" CTS to 4" IPS.
Imcoa SS has a low thermal conductivity and very low water vapor transmission rate. This low density product demonstrates excellent thermal, physical and chemical resistant properties and has a broad service temperature range between -297°F and 200°F (-183°C and 93°C). It can be installed in commercial, industrial and residential insulation projects. It is acceptable for use with heat tracing/heat tape.
Overview
Imcoa® SS closed-cell PE foam self-seal pipe insulation is used in residential, commercial and industrial projects to prevent heat loss and protect pipes from freezing. Imcoa SS has an integrated self-sealing system that makes it quick and easy to install.
Product Advantages
Available in the most frequently specified pipe sizes and thicknesses
Indoor Air Quality: Low VOC, fiber-free, non-particulating, formaldehyde-free insulation
GREENGUARD Gold Certified
ASTM E 84 25/50 rated
Reduces plumbing noise
Resists mold and mildew
Cost effective
Application Areas
Domestic hot and cold water lines
Domestic heating and plumbing line
Acceptable for use on PEX
Acceptable for use with heat tracing/heat tape
Specifications
Dark gray flexible PE thermal insulation in tubular form with self-seal closure
ASTM C-1427, Type 1, Grade 1
ASTM E 84 1” 25/50
Specification Compliance ASTM C 1427, NFPA 90 A/B / Acceptable for use in duct/plenum applications
Dade Co., Fl., Product Control Approved, Acceptance 95-1215.08
New York City OTCR #13-09 USDA Requirements
Sound transmission co-efficient = 11 at 1" per ASTM E90
City of Los Angeles, Gen. Approval, Research Report RR 8316
Greenguard Gold Certified
Approved as being eligible to contribute points toward a building under the National Green Building Standard
Sizes:
Wall thicknesses of 3/8", 1/2", 3/4" and 1"
In sizes ranging from 3/8" CTS to 4" IPS
For complete Specification details, download the product submittal sheet.
Accessories
ArmaFlex 520 and 520 Black Adhesive – Air-drying, solvent-based contact adhesive for strong bonds and tight seams.
