Armacell Product Selector

ArmaFlex Ultra Tube and LapSeal

Tube and LapSeal Tubes

Armacell is constantly looking at ways to improve our products while making safety a top priority. Our new ArmaFlex® Ultra with FlameDefense™ technology resists burning and reduces smoke development. It is this commitment that elevated ArmaFlex Ultra to become the first elastomeric insulation Classified by UL to UL 723 at 25/50.

When you specify ArmaFlex Ultra you know you are meeting the current IMC building code which require that mechanical insulation products achieve specific flame and smoke ratings, and that these ratings be regularly certified by a third party lab. That’s your guarantee that ArmaFlex Ultra is a safer elastomeric insulation material today and tomorrow.

Overview

Pipe Insulation Classified by UL to UL 723 at 25/50

Product Advantages

  • First elastomeric insulation Classified by UL to UL 723 at 25/50 rating

  • Protection against thermal losses, condensation and moisture ingress

  • Meets code requirements for installation in plenums

  • Low water vapor permeability

  • Available with and without lap seal closure

Application Areas

  • Refrigeration lines, line sets, chilled water pipes, hot and cold water piping

  • HVAC systems, VRV and VRF systems

  • Exposed ceilings and air plenums

  • Commercial, mechanical, industrial, construction

  • OEM transportation and equipment

 

 

Specifications

Gray, flexible, closed-cell elastomeric thermal insulation in tubular form. Available with and without the lap seal closure.

Specification Compliance

  • ASTM C 534, Type I – Tubular Grade 1

  • ASTM E 84

  • UL 723

  • NFPA 90A, 90B

  • ASTM C1338

  • ASTM D 1056, 2C1

  • Conforms to ASHRAE 90.1 and IECC energy code requirements

  • Conforms to California Building Energy Efficiency Standards, Title 24 Section 120.3

  • Manufactured without CFCs, HFCs, HCFCs, PBDEs, or Formaldehyde

  • Complies with Toxic Gas Generation by Materials on Combustion Boeing Aircraft Standard BSS 7239.

  • All Armacell facilities in North America are ISO 9001 certified

Sizes:

  • ½”, 1” (13mm, 25mm) Nominal Wall Thickness

  • 1/2" to 1-3/8" ID in 1/2" walls; 1/2" to 6" IPS ID in 1" walls

  • Lengths: 6’(1.83m)

For complete Specification details, download the product submittal sheet.

Accessories

  • ArmaFlex 520– Air-drying, solvent-based contact adhesive for strong bonds and tight seams.

Armacell Manufacturing Locations

Did you know?

Armacell has 5 manufacturing facilities in the US and 1 in Canada. That means almost any product you order in North America is made in North America. Some exceptions apply.

Made In USA

© Armacell, 2014-2021 • 55 Vilcom Center Drive • Suite 200  • Chapel Hill, NC 27514 • tel 800 866 5638 • email: info.us@armacell.com