News from the floor of 2018 AHR Expo in Chicago
January 22, 2018
Armacell reports on the activity on the floor of the AHR Expo in Chicago Jan 22 through Jan 24.
Flame and Smoke Requirements for Mechanical Insulation
January 17, 2018
Flammability is critical to the safety of buildings, vehicles, and products. The following technical bulletin explains the major flame and smoke requirements for mechanical insulation and how Armacell products comply with these requirements.
Be Confident in the New Year with a Newly Refreshed Insulation Spec!
January 10, 2018
The introduction of a new year is a chance to begin again with rejuvenated energy and passion for the upcoming year. Often these new beginnings start as good intentions with New Year’s resolutions, however within a few weeks or months these resolutions are forgotten or left behind due to other priorities. Having just emerged from the holiday season when things slow down a bit, you may have had some time to assess the state of your specifications.
Energy Standards and Codes for Mechanical Insulation in Commercial Buildings
December 13, 2017
Energy conservation is important to everyone. It reduces the consumption of natural resources, reduces pollution in the environment, and saves building owners and homeowners money. As a result, energy conservation standards and codes were developed to ensure energy conservation is a priority for new and existing buildings.
Installing Armaflex on Cryogenic Systems
December 08, 2017
Armaflex insulation has proven performance insulating cryogenic systems down to -297°F. AP Armaflex is ideal for applications operating all the way down to -40°F because it remains flexible down to -40°F and its excellent thermal conductivity and low water vapor permeability make it extremely efficient at preventing condensation. Read about very important installation points that are critical to the performance of Armaflex on cryogenic systems.
Save Energy and Money with this easy DIY Insulation Project
November 29, 2017
Every section of water pipe in your home can benefit from insulation, but in some cases, it can be impossible to install if the walls have been sealed up. There are areas in your home that should be accessible that will definitely benefit from insulation.
An Inside Look at UL’s Performance and Reliability Testing Center
November 15, 2017
Did you ever wonder why some of your appliances last longer than others? Or, why one product performs better than its competitor? If yes, then you are in the right place as the staff at UL’s Product Engineering Services team in Newton, Iowa have been answering those questions and more since 2008.
The Different Types of Backer Rod and Applications
November 10, 2017
When selecting a backer rod material for your specific project, it’s important to understand that there are several different types. Backer rod comes in variations for different joint sealant applications and for cold- and hot-pour sealant uses. In this blog, each of Armacell’s FillPro™ Backer Rod characteristics will be detailed, including their unique properties, benefits, and intended application.
Why it’s Important to Check Insulation on Residential AC Units Yearly and How to Replace
October 18, 2017
Insulation on the suction line of your AC unit performs an important role in keeping your AC functioning properly. Over time UV rays, weathering, and mowing and trimming can cause damage to portions of the insulation that is located outdoors. This blog looks at tips for replacing damaged pipe insulation AC refrigerant lines.
Closed Cell Sponge Rubber: Unique Features and Common Applications
October 12, 2017
This blog post content comes from CGR Products series called “Material of the Month.” The series spotlights Closed Cell Sponge Rubber as a unique material that CGR works with, as well as it's common applications.