Sheet and Roll Insulation
Tundra® Sheet and Roll closed-cell polyethylene foam insulation is used in residential, commercial and industrial plumbing projects to prevent heat loss and protect pipes from freezing. Tundra Sheet and Roll is very flexible making it easy to cut and install.
Tundra Sheet and Roll has a low thermal conductivity and very low water vapor transmission rate. This low density product demonstrates excellent thermal, physical and chemical resistant properties and has a broad service temperature range between -297°F and 200°F (-183°C and 93°C). It can be installed in commercial, industrial and residential insulation projects.
Tundra® Sheet and Roll closed-cell PE foam sheet and roll insulation is used to retard heat flow and provide condensation control on large diameter piping, tanks, vessels and equipment.
Available in a wide range of sizes and thicknesses
Indoor Air Quality: Low VOC, fiber-free, non-particulating, formaldehyde-free insulation
ASTM E 84 25/50 rated
Reduces plumbing and equipment noise
Resists mold and mildew
Made in Canada
Large diameter plumbing pipes
Tanks, vessels and equipment
Acceptable for use with heat tracing/heat tape
Dark gray flexible PE thermal insulation in sheets and rolls
ASTM C1427, Type 2
ASTM E 84 / CAN ULC S102.2 1" 25/50
Resistant to mold growth
Sound transmission co-efficient = 11 at 1" per ASTM E 90 = 11 at 1" per ASTM E 90
Sheet Width and Length:
3' x 4’ (0.92 m x 1.22 m)
Sheet Thickness (nominal):
1/4", 3/8", 1/2", 3/4", 1", 1-1/2", 2", 2-1/2" (6.4 mm, 10 mm, 13 mm, 19 mm, 25 mm, 38 mm, 51 mm, 64 mm)
Roll Width and Length:
4’ x 50’ (1.22m x 15.3m)
Roll Thickness (nominal):
3/8", 1/2", 3/4", 1", 1-1/2", 2", 2-1/2" (10 mm, 13 mm, 19 mm, 25 mm, 25 mm, 38 mm, 51 mm, 64 mm)
For complete Specification and R-Value details, download the product submittal sheet.
ArmaFlex 520 and 520 Black Adhesive – Air-drying, solvent-based contact adhesive for strong bonds and tight seams.
AP ArmaFlex Insulation Tape
ArmaFlex Black LapSeal Tape