ArmaFlex Ultra Tube
Tube and LapSeal Tubes
Armacell is constantly looking at ways to improve our products while making safety a top priority. Our new ArmaFlex® Ultra with FlameDefense™ technology resists burning and reduces smoke development. It is this commitment that elevated ArmaFlex Ultra to become the first elastomeric insulation Classified by UL to UL 723 at 25/50. R39561
When you specify ArmaFlex Ultra you know you are meeting the current IMC building codes which require that mechanical insulation products used in an air plenum be "listed and labeled" as achieving specific flame and smoke ratings, and that these ratings be regularly certified by a third party lab. That’s your guarantee that ArmaFlex Ultra is a safer elastomeric insulation material today and tomorrow.
ArmaFlex Ultra is available in tube format now and soon to be available in LapSeal closure.
Overview
Pipe Insulation Classified by UL to UL 723 at 25/50. R39561
Product Advantages
First elastomeric insulation Classified by UL to UL 723 at 25/50 rating
Protection against thermal losses, condensation and moisture ingress
Meets code requirements for installation in plenums
Low water vapor permeability
Available with and without lap seal closure
Application Areas
Refrigeration lines, line sets, chilled water pipes, hot and cold water piping
Return air plenums
HVAC systems, VRV and VRF systems
Commercial, mechanical, industrial, construction
OEM transportation and equipment
Specifications
Gray, flexible, closed-cell elastomeric thermal insulation in tubular form. Available with and without the lap seal closure.
Specification Compliance
ASTM C 534, Type I – Tubular Grade 1
ASTM E 84
UL 723
NFPA 90A, 90B
ASTM C1338
ASTM D 1056, 2C1
Conforms to ASHRAE 90.1 and IECC energy code requirements
Conforms to California Building Energy Efficiency Standards, Title 24 Section 120.3
Manufactured without CFCs, HFCs, HCFCs, PBDEs, or Formaldehyde
Complies with Toxic Gas Generation by Materials on Combustion Boeing Aircraft Standard BSS 7239.
All Armacell facilities in North America are ISO 9001 certified
Sizes:
½”, 1” (13mm, 25mm) Nominal Wall Thickness
1/2" to 1-3/8" ID in 1/2" walls; 1/2" to 6" IPS ID in 1" walls
Lengths: 6’(1.83m)
For complete Specification details, download the product submittal sheet.
Accessories
ArmaFlex 520– Air-drying, solvent-based contact adhesive for strong bonds and tight seams.