Armacell Product Selector

Tubolit Sheet and Roll

Sheet and Roll Insulation

Tubolit® Sheet and Roll closed-cell polyethylene foam insulation is used in residential, commercial and industrial plumbing projects to prevent heat loss and protect pipes from freezing. Tubolit Sheet and Roll is very flexible making it easy to cut and install.

Tubolit Sheet and Roll has a low thermal conductivity and very low water vapor transmission rate. This low density product demonstrates excellent thermal, physical and chemical resistant properties and has a broad service temperature range between -297°F and 200°F (-183°C and 93°C). It can be installed in commercial, industrial and residential insulation projects. It is acceptable for use with heat tracing/heat tape.

Overview

Tubolit® Sheet and Roll closed-cell PE foam sheet and roll insulation is used to retard heat flow and provide condensation control on large diameter piping, tanks, vessels and equipment. 

Product Advantages

  • Available in a wide range of sizes and thicknesses

  • Indoor Air Quality: Low VOC, fiber-free, non-particulating, formaldehyde-free insulation

  • ASTM E 84 25/50 rated

  • Reduces plumbing and equipment noise

  • Resists mold and mildew

  • Cost effective

  • Made in USA

Application Areas

  • Large diameter plumbing pipes

  • tanks, vessels and equipment

  • acceptable for use with heat tracing tape

Specifications

Specifications

  • Dark gray flexible PE thermal insulation in sheets and rolls

  • ASTM C1427, Type 2

  • ASTM E 84 1" 25/50

  • CFC/HCFC Free

  • Low VOCs

  • Halogen Free

  • Non-porous

  • Fiber Free

  • Resistant to mold growth

  • Sound transmission co-efficient = 11 at 1" per ASTM E 90 = 11 at 1" per ASTM E 90

Sizes:

Sheet Width and Length:

  • 3' x 4’ (0.92 m x 1.22 m)

Sheet Thickness (nominal):

  • 1/4", 3/8", 1/2", 3/4", 1", 1-1/2", 2", 2-1/2" (6.4 mm, 10 mm, 13 mm, 19 mm, 25 mm, 38 mm, 51 mm, 64 mm)

Roll Width and Length:

  • 4’ x 50’ (1.22m x 15.3m)

Roll Thickness (nominal):

  • 3/8", 1/2", 3/4", 1", 1-1/2", 2", 2-1/2" (10 mm, 13 mm, 19 mm, 25 mm, 25 mm, 38 mm, 51 mm, 64 mm)

For complete Specification and R-Values details, download the product submittal sheet.

Accessories

  • ArmaFlex 520 and 520 Black Adhesive – Air-drying, solvent-based contact adhesive for strong bonds and tight seams.

  • AP ArmaFlex Insulation Tape

  • ArmaFlex Black LapSeal Tape

Armacell Manufacturing Locations

Did you know?

Armacell has 5 manufacturing facilities in the US and 1 in Canada. That means almost any product you order in North America is made in North America. Some exceptions apply.

Made In USA

2018 © Armacell LLC • 55 Vilcom Center Drive • Suite 200  • Chapel Hill, NC 27514 • tel 800 866 5638 • email: info.us@armacell.com