Armacell Product Selector

Imcoa

Tube Insulation

Imcoa® closed-cell polyethylene foam semi-slit pipe insulation is used in residential, commercial and industrial projects to prevent heat loss and protect pipes from freezing. It is available in wall thicknesses of 3/8", 1/2", 3/4" and 1", in sizes ranging from 3/8" CTS to 4" IPS.

Imcoa has a low thermal conductivity and very low water vapor transmission rate. This low density product demonstrates excellent thermal, physical and chemical resistant properties and has a broad service temperature range between -297°F and 200°F (-183°C and 93°C). It can be installed in commercial, industrial and residential insulation projects. It is acceptable for use with heat tracing/heat tape.

Overview

Imcoa® closed-cell PE foam semi-slit pipe insulation is used in residential, commercial and industrial projects to prevent heat loss and protect pipes from freezing.

Product Advantages

  • Available in the most frequently specified pipe sizes and thicknesses

  • Indoor Air Quality: Low VOC, fiber-free, non-particulating, formaldehyde-free insulation

  • GREENGUARD Gold Certified

  • ASTM E 84 25/50 rated

  • Reduces plumbing noise

  • Resists mold and mildew

  • Cost effective

Application Areas

  • Domestic hot and cold water lines

  • Domestic heating and plumbing line

  • Acceptable for use on PEX

  • Acceptable for use with heat tracing/heat tape

GREENGUARD_UL2818                  USGBC Member

Specifications

Dark gray flexible PE thermal insulation in tubular form

  • ASTM C-1427, Type 1, Grade 1

  • ASTM E 84 1” 25/50

  • Specification Compliance ASTM C 1427, NFPA 90 A/B / Acceptable for use in duct/plenum applications

  • Dade Co., Fl., Product Control Approved, Acceptance 95-1215.08

  • New York City OTCR #13-09 USDA Requirements

  • Sound transmission co-efficient = 11 at 1" per ASTM E90

  • City of Los Angeles, Gen. Approval, Research Report RR 8316

  • Greenguard Gold Certified

  • Approved as being eligible to contribute points toward a building under the National Green Building Standard

Sizes:

  • Wall thicknesses of 3/8", 1/2", 3/4" and 1"

  • In sizes ranging from 3/8" CTS to 4" IPS

For complete Specification details, download the product submittal sheet.

Accessories

  • Armaflex 520 and 520 Black Adhesive – Air-drying, solvent-based contact adhesive for strong bonds and tight seams.

Armacell Manufacturing Locations

Did you know?

Armacell has 6 manufacturing facilities in the US and 1 in Canada. That means almost any product you order in North America is made in North America. Some exceptions apply.

Made In USA

2016 © Armacell LLC • 55 Vilcom Center Drive • Suite 200  • Chapel Hill, NC 27514 • tel 800 866 5638 • email: info.us@armacell.com