Armacell Product Selector

ArmaTuff and ArmaTuff SA

Durable Cladded Insulation in Sheets and Rolls

ArmaTuff is the one-step installation solution for thermal mechanical insulation and UV protection of exterior ducts, tanks, vessels, large pipes and fittings. The combination of a tough metal cladding laminated to Armaflex® closed-cell foam insulation provides durable, year-round weather protection.

ArmaTuff is made with a factory-applied, heavy-duty 12 mil embossed white laminate. It’s ideal for exterior applications where added protection is required without compromising aesthetics. The puncture-resistant metal cladding requires virtually no maintenance.

Overview

ArmaTuff is the one-step installation solution for thermal mechanical insulation and UV protection of exterior ducts, tanks, vessels, large pipes and fittings.

Product Advantages

  • Tough metal cladding eliminates need for additional jacketing

  • White embossed cladding surface does not need painting

  • Available self-adhesive backing further reduces installation labor

  • The combination of metal cladding and Armaflex insulation provides zero permeability

  • Reliable protection from moisture or impact damage

Application Areas

  • Exterior applications

  • Rooftop ductwork

  • Outdoor tanks or large vessels

Specifications

Armaflex flexible elastomeric thermal insulation with a 12 mil laminated covering, available with or without a pressure sensitive adhesive in sheet and roll form.

Sizes:

Sheet: With or Without Pressure Sensitive Adhesive

  • Width and Length: 36” x 48” (.915m x1.22m)

  • Thickness (nominal): 1”, 1-1/2” and 2” (25, 38 and 50mm)

Roll: Available Without Pressure Sensitive Adhesive Only

Width: 48” (1.22m)

  • Thickness (nominal) x Length:

  • 1” x 35’ (25mm x 10.7m)

  • 1-1/2” x 25’ (38mm x 7.6m)

  • 2” x 18’ (50mm x 5.4m)

Specifications Compliance:

  • ASTM C 534, Type II — Sheet Grade 1

  • ASTM C 1534

  • ASTM D 1056, 2B1

  • ASTM G21/C1338

  • ASTM G22

  • MEA 107-89M

  • NFPA 90A, 90B

  • UL 181

  • UL 94 5V-A, V-0, File E55798

  • City of LA – RR 7642

ArmaTuff has not been tested by ASTM E 84 or CAN/ULC for Flame Spread and Smoke Developed Index and is not recommended for interior applications where a 25/50 rating is required.

Approvals, Certifications, Compliances:

  • Key physical properties are approved by Factory Mutual.

  • GREENGUARD Gold Certified

  • Manufactured without CFCs, HFCs, HCFCs, PBDEs, or Formaldehyde.

  • Made with EPA registered Microban® antimicrobial product protection.

  • All Armacell facilities in North America are ISO 9001:2008 certified.

For complete Specification details, download the product submittal sheet.

Accessories

  • ArmaTuff Tape – Durable 6” seam tape with the same tough cladding as ArmaTuff insulation

  • Armaflex 520 and 520 Black Adhesive – Air-drying, solvent-based contact adhesive for strong bonds and tight seams.

  • Armaflex Low VOC Spray Contact Adhesive – Low VOC adhesive in 27 pound aerosolized canisters

Armacell Locations

Did you know?

Armacell has 5 manufacturing facilities in the US. That means almost any product you order in North America is made in the USA. Some exceptions apply.

Made In USA

2014 © Armacell LLC • 7600 Oakwood Street Ext. • Mebane, NC 27302 • tel 919 304-3846 • fax 919 304-3720 • email: info.us@armacell.com